Vesta

Presilva Vesta is a water-based, glossy, and fast-drying one-pot system (primer, base coat, and topcoat) for indoor and outdoor applications on facade cladding and facade finishes. Presilva Vesta is a high-quality hybrid paint system formulated with a combination of alkyd and acrylic resins. It offers excellent adhesion and very good coverage.

Presilva Vesta is sustainably elastic, features water-repellent technology, provides long-lasting color and gloss retention, and has a filling capacity that ensures seams and knots in facade woodwork appear smooth and uniform. It can be easily applied, even in thick layers without sagging, dries quickly, and offers extremely long-lasting protection. The product is non-flammable and should be stored in frost-free conditions.

- Water-based  
- Very high-quality paint system  
- Unique binder combination worldwide  
- Excellent UV protection  
- At least 10 years maintenance-free*  
- Can be applied in thick layers without sagging  
- Glossy  
- Fast-drying
- Universally over-paintable  
- Usable as a primer, base coat, and topcoat  
- Suitable for indoor and outdoor applications on finishes such as boards, paneling, wooden walls of log homes, and wooden sheds  
- Suitable for new materials as well as maintenance and renovation painting. Suitable for new and previously treated wooden substrates such as facade cladding, fascia boards, dormers, etc.
‍

Application method: Brushes and spraying (Airless/Airmix).

Processing conditions: Presilva Vesta should be applied at a minimum temperature of 8°C, with 70% relative humidity, and a minimum dew point temperature of 4°C. Stir before use and check the color. Do not apply in direct sunlight, as dew can cause dull spots.

Pre-treatment: The substrate must be intact, clean, dry, sanded, and free of grease. Lightly sand new wood in the direction of the grain. All joints must be sealed, and glazing putty should be applied in a draining manner and adhere well to the substrate. For old paint layers, any loose parts should be removed down to healthy wood. Fully sand weathered wood until healthy wood is visible again. Repairs should be made with acrylic putty (indoor) and 2K epoxy putty (outdoor). End grain should be sealed with Presilva Endgrainsealer. Lightly sand Presilva Vesta before applying a new layer.

Thinning: The product is supplied ready for use; if necessary, thin with a maximum of 2% water.

Drying time: Under drying conditions of 20°C and 60% relative humidity, and a dry layer thickness of 45 μm, drying times are approximate and may vary depending on wood quality, wet layer thickness, humidity, temperature, and ventilation.

- Dust dry after about 30 minutes
- Tack-free after about 1.5 hours
- Repaintable after about 4 hours